HYDRAULIC DRIVE PLUNGER PUMPS

Industrial Hydraulic Drive Plunger Pumps

  • High Efficiency Hydraulic Gear Motors
  • Flange Adapter Mounting
  • Heavy Duty Flex Coupler Drive
  • J.I.C. #10 Male Hydraulic Fittings
  • Mounting Rails Included
  • Simple Design for Easy Operation and Maintenance
  • All Components are Independent, Eliminating Cross Contamination of Pumping Fluids & Hydraulic Fluids.

P-Series Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty Hydraulic Gear Motor with J.I.C. #10 Male Side Inlet & Outlet Fittings. Pressurized or Flooded Suction ONLY

P-Series Hydraulic Drive Plunger Pump

Model Gpm Psi Hydraulic Requirements Weight
Hydraulic Drive
1750 RPM		 PND 3.0/20-ZH 3.0 1000 5 GPM @ 1400 PSI 24 lbs.
3.0 1500 5 GPM @ 1800 PSI
3.0 2000 5 GPM @ 2200 PSI
Hydraulic Drive
1750 RPM		 PND 4.0/15-ZH 4.0 1000 5 GPM @ 1600 PSI 24 lbs.
4.0 1200 5 GPM @ 1800 PSI
4.0 1500 5 GPM @ 2200 PSI

P-Series Industrial Hydraulic-Drive Plunger Pump Kits

Hydraulic Drive Pump Kits
Kit Includes P-Series Hydraulic Drive Pump with Mounting Rails, Unloader, Hydraulic Motor, 14" x 20" 3/4" inlet hose barb, hydraulic motor, Base Plate with Rubber Bumpers and Safety Pop-Off Valve.

P-Series Hydraulic Drive Plunger Pump Kit

Model Specifications Weight
PND 3.0/20-ZH/K See Chart Above for Ratings & Hydraulic Requirements 45 lbs.
PND 4.0/15-ZH/K See Chart Above for Ratings & Hydraulic Requirements 45 lbs.

M-Series Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty Hydraulic Gear Motor with J.I.C. #10 Male Side Inlet & Outlet Fittings. Pressurized or Flooded Suction ONLY.

M-Series Hydraulic Drive Plunger Pump

Model Gpm Psi Hydraulic Requirements Weight
Hydraulic Drive
1750 RPM		 MD 4.0/30-SH 4.0 2000 12 GPM @ 1100 PSI 36 lbs.
4.0 2500 12 GPM @ 1300 PSI
4.0 3000 12 GPM @ 1500 PSI
Hydraulic Drive
1750 RPM		 MD 5.0/25-SH 5.0 1500 12 GPM @ 1100 PSI 36 lbs.
5.0 2000 12 GPM @ 1300 PSI
5.0 2500 12 GPM @ 1500 PSI

M-Series Industrial Hydraulic-Drive Plunger Pump Kits

Hydraulic Drive Pump Kits
Kit includes M-Series Hydraulic Drive Pump with Mounting Rails, Unloader, 1" inlet hose barb, Hydraulic Motor, 14" x 20" Base Plate with Rubber Bumpers, Thermal Relief Valve and Safety Pop-Off Valve.

M-Series Hydraulic Drive Plunger Pump Kit

Model Specifications Weight
MD 4.0/30-SH/K See Chart Above for Ratings & Hydraulic Requirements 65 lbs.
MD 5.0/25-SH/K See Chart Above for Ratings & Hydraulic Requirements 65 lbs.

SUPER DUTY MK Series Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty Hydraulic Gear Motor with J.I.C. #10 Male Side Inlet & Outlet Fittings. Pressurized or Flooded Suction ONLY.

MK-Series Hydraulic Drive Plunger Pump

Model Gpm Psi Hydraulic Requirements Weight
Hydraulic Drive
1750 RPM		 MKD 4.0/40-SH 4.0 3000 12 GPM @ 1500 PSI 39 lbs.
4.0 3500 12 GPM @ 1700 PSI
4.0 4000 12 GPM @ 2000 PSI
Hydraulic Drive
1750 RPM		 MKD 5.0/35-SH 5.0 2500 12 GPM @ 1500 PSI 39 lbs.
5.0 3000 12 GPM @ 1700 PSI
5.0 3500 12 GPM @ 2000 PSI

SUPER DUTY MK-Series Industrial Hydraulic-Drive Plunger Pump Kits

Hydraulic Drive Pump Kits
Kit includes MK-Series Hydraulic Drive Pump with Mounting Rails, Unloader, Hydraulic Motor, 14" x 20" Base Plate with Rubber Bumpers, Thermal Relief Valve and Safety Pop-Off Valve.

MK-Series Hydraulic Drive Plunger Pump Kit

Model Specifications Weight
MKD 4.0/40-SH/K See Chart Above for Ratings & Hydraulic Requirements 70 lbs.
MKD 5.0/35-SH/K See Chart Above for Ratings & Hydraulic Requirements 70 lbs.

G-Series Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty Hydraulic Gear Motor with J.I.C. #10 Male Side Inlet & Outlet Fittings. Pressurized or Flooded Suction ONLY.

G-Series Hydraulic Drive Plunger Pump

Model Gpm Psi Hydraulic Requirements Weight
Hydraulic Drive
1750 RPM		 GD 5.5/30-SH 5.5 2000 12 GPM @ 1200 PSI 48 lbs.
5.5 2500 12 GPM @ 1400 PSI
5.5 3000 12 GPM @ 1700 PSI
Hydraulic Drive
1750 RPM		 GD 7.0/22-SH 7.0 1000 12 GPM @ 1200 PSI 48 lbs.
7.0 1500 12 GPM @ 1400 PSI
7.0 2200 12 GPM @ 1700 PSI
Hydraulic Drive
1750 RPM		 GD 8.0/22-SH 8.0 1000 12 GPM @ 1300 PSI 48 lbs.
8.0 1500 12 GPM @ 1500 PSI
8.0 2200 12 GPM @ 1900 PSI

G-Series Industrial Hydraulic-Drive Plunger Pump Kits

Hydraulic Drive Pump Kits
Kit Includes G-Series Hydraulic Drive Pump with Mounting Rails, Unloader, 1" Hose Barb Inlet Fittings, Hydraulic Motor, 14" x 20" Base Plate with Rubber Bumpers and Safety Pop-Off Valve.

G-Series Hydraulic Drive Plunger Pump Kit

Model Specifications Weight
GD 5.5/30-SH/K See Chart Above for Ratings & Hydraulic Requirements 80 lbs.
GD 7.0/22-SH/K See Chart Above for Ratings & Hydraulic Requirements 80 lbs.
GD 8.0/22-SH/K See Chart Above for Ratings & Hydraulic Requirements 80 lbs.

SUPER DUTY GK-Series Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty, Cast Iron Hydraulic Gear Motor with Female Rear Ports. Pressurized or Flooded Suction ONLY.

GK-Series Hydraulic Drive Plunger Pump

Model Gpm Psi Hydraulic Requirements Weight
Hydraulic Drive
1450 RPM		 GKC 21/35-SH 5.5 4000 20 GPM @ 1800 PSI 75 lbs.
5.5 4500 20 GPM @ 2000 PSI
5.5 5000 20 GPM @ 2200 PSI
Hydraulic Drive
1450 RPM		 GKC 26/24-SH 7.0 2500 20 GPM @ 1800 PSI 75 lbs.
7.0 3000 20 GPM @ 2000 PSI
7.0 3500 20 GPM @ 2200 PSI
Hydraulic Drive
1450 RPM		 GKC 26/28-SH 7.0 3000 20 GPM @ 2000 PSI 75 lbs.
7.0 3500 20 GPM @ 2200 PSI
7.0 4000 20 GPM @ 2400 PSI
Hydraulic Drive
1450 RPM		 GKC 38/17-SH 10.0 1500 20 GPM @ 1800 PSI 75 lbs.
10.0 2000 20 GPM @ 2000 PSI
10.0 2500 20 GPM @ 2200 PSI
Hydraulic Drive
1450 RPM		 GKC 38/20-SH 10.0 2000 20 GPM @ 2000 PSI 75 lbs.
10.0 2500 20 GPM @ 2200 PSI
10.0 3000 20 GPM @ 2400 PSI

SUPER DUTY GK-Series Industrial Hydraulic-Drive Plunger Pump Kits

Hydraulic Drive Pump Kits
Kit Includes GK-Series Hydraulic Drive Pump with Mounting Rails, Unloader, 1" Hose Barb Inlet Fittings, Hydraulic Motor, 14" x 26" Base Plate with Rubber Bumpers and Safety Pop-Off Valve.

GKC 26/24-SH/K
GKC 38/17-SH/K
GKC 38/20-SH/K

P-Series Hydraulic Drive Plunger Pump Kit  

GKC 21/35 SH/K

Model Specifications Weight
GKC 21/35-SH/K See Chart Above for Ratings & Hydraulic Requirements 100 lbs.
GKC 26/24-SH/K See Chart Above for Ratings & Hydraulic Requirements 100 lbs.
GKC 26/28-SH/K See Chart Above for Ratings & Hydraulic Requirements 100 lbs.
GKC 38/17-SH/K See Chart Above for Ratings & Hydraulic Requirements 100 lbs.
GKC 38/20-SH/K See Chart Above for Ratings & Hydraulic Requirements 100 lbs.

SUPER DUTY HP GHC-Series Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty, Cast Iron Hydraulic Gear Motor with 1" Female O-Ring Rear Ports and a 1/4" FNPT Case Drain.

Pressurized Inlet ONLY.

GHC-Series Hydraulic Drive Plunger Pump

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1450 RPM GHC 12/50-SH 3.2 7300 20 GPM @ 2000 PSI 80 lbs.
1450 RPM GHC 16/50-SH 4.2 7300 20 GPM @ 2000 PSI 80 lbs.

MSC-Series Aggressive Environment Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty,  Hydraulic Gear Motor with J.I.C. #10 Male Side Inlet & Outlet Fittings.  Pressurized or Flooded Suction ONLY.

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1450 RPM MSC 16/20-SH 4.2 3000 10 GPM @ 1700 PSI 39 lbs.
MSC 20/20-SH 5.3 3000 10 GPM @ 1900 PSI 39 lbs.

GSC-Series Aggressive Environment Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails & Hydraulic Motor
Heavy Duty, cast iron  Hydraulic Gear Motor with #1 female o-ring Rear Ports and 1/4" FNPT Case Drain.

Pressurized or Flooded Suction ONLY.

  GSC 27/15-SH

GSC 34/15-SH

                                                                                   GSC  42/15-SH

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1450 RPM GSC 27/15-SH 7.0 2200 10 GPM @ 1900 PSI 52 lbs.
GSC 34/15-SH 9.0 2200 20 GPM @ 1800 PSI 80 lbs.
GSC 42/15-SH 11.0 2200 20 GPM @ 2000 PSI 80 lbs.

NX-Series Industrial Hydraulic-Drive Plunger Pumps

Heavy Duty, Cast Iron  Hydraulic Gear Motor with 1-1/4" Female O-Ring side Ports and 1/4" FNPT Case Drain.

Rough Coat powder coated 20" x 30" base plate, mounting brackets & drive coupler shield.

Eight heavy duty rubber support bumpers for smooth, quiet operation.  Dual lift rings for easier handling.

Quad flex coupler drive assembly.  Pressurized or Flooded Suction ONLY.

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1450 RPM NX-35/300 RH 9 4500 40 GPM @ 2000 PSI 175 lbs.
NX-55/200 RH 14 3000 40 GPM @ 2000 PSI 175 lbs.
NX-75/150 RH 20 2200 40 GPM @ 2000 PSI 175 lbs.

NX-Series Industrial High Pressure Hydraulic-Drive Plunger Pumps

Hydraulic Drive Plunger-Pumps with Mounting Rails & High Pressure Hydraulic Motor

Heavy Duty, Cast Iron, high pressure Hydraulic Gear Motor with 1-1/4" Female O-Ring side Ports, #4 O.R.B. case drain,

dual lift rings & a quad flex coupler drive assembly.  Pressurized or Flooded Suction ONLY.

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1450 RPM NX-35/300 RH-HP 9 4500 28 GPM @ 2500 PSI 175 lbs.
NX-55/200 RH-HP 14 3000 28 GPM @ 2500 PSI 175 lbs.
NX-75/150 RH-HP 20 2200 28 GPM @ 2500 PSI 175 lbs.

PENTA Series Industrial Hydraulic-Drive Plunger Pumps

Heavy duty, cast iron hydraulic gear motor with 1-1/4" female o-ring side ports and a 1/4" FNPT case drain. Rough Coat powder coated 20" x 30" base plate, mounting brackets & drive coupler shield. Eight heavy duty rubber support bumpers for smooth, quiet operation. Dual lift rings for easier handling. Quad flex coupler drive assembly. Pressurized or flooded suction ONLY.

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1000 RPM PENTA-B 50/200 RH 13 3000 30 GPM @ 2000 PSI 250 lbs.
1000 RPM PENTA-B 40/280 RH 10 4000 30 GPM @ 2000 PSI 250 lbs.
1450 RPM PENTA-C 70/200 RH 18 3000 40 GPM @ 2000 PSI 250 lbs.
1450 RPM PENTA-C 55/280 RH 15 4000 40 GPM @ 2000 PSI 250 lbs.
1450 RPM PENTA-C 30/500 RH 8 7300 40 GPM @ 2000 PSI 250 lbs.
1750 RPM PENTA-D 70/280 RH 18 4000 50 GPM @ 2000 PSI 250 lbs.
1750 RPM PENTA-D 35/500 RH 9.5 7300 50 GPM @ 2000 PSI 250 lbs.

PENTA Series Industrial High Pressure Hydraulic-Drive Plunger Pumps

Hydraulic Drive Plunger-Pumps with Mounting Rails & High Pressure Hydraulic Motor

Heavy Duty, Cast Iron, high pressure Hydraulic Gear Motor with 1-1/4" female o-ring side ports, #4 O.R.B. case drain,

dual lift rings & a quad flex coupler drive assembly.   Pressurized or Flooded Suction ONLY.

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1450 RPM PENTA-C 70/200 RH-HP 18 3000 28 GPM @ 3000 PSI 250 lbs.
1450 RPM PENTA-C 55/280 RH-HP 15 4000 28 GPM @ 3000 PSI 250 lbs.
1450 RPM PENTA-C 30/500 RH-HP 8 7300 28 GPM @ 3000 PSI 250 lbs.
1750 RPM PENTA-D 70/280 RH-HP 18 4000 32 GPM @ 3000 PSI 250 lbs.
1750 RPM PENTA-D 35/500 RH-HP 9.5 7300 32 GPM @ 2500 PSI 250 lbs.

GAMMA Series Industrial Hydraulic-Drive Plunger Pumps

Hydraulic Drive Pumps with Mounting Rails, Hydraulic Adapter Kits & Hydraulic Motors.
Heavy Duty, Cast Iron Hydraulic Gear Motor with Female Top Ports. Pressurized or Flooded Suction ONLY.

GAMMA-Series Hydraulic Drive Plunger Pump         

Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
600 RPM GAMMA-62/CC-HYD 16 1000 14 GPM @ 1400 PSI 75 lbs.
600 RPM GAMMA-105/CC-HYD 28 850 14 GPM @ 1800 PSI 100 lbs.

VX-Series Industrial Hydraulic Drive Plunger Pumps

Heavy duty, cast iron hydraulic gear motor with 1-1/4" female o-ring side ports and 1/4" FNPT case drain.  Rough coat powder

coated 20" x 30" base plate, mounting brackets & drive coupler shield.  Eight heavy duty rubber support bumpers for smooth,

quiet operation.  Dual lift rings for easier handling.  Quad flex coupler drive assembly.  Pressurized or flooded suction ONLY.

 

Model Gpm Psi Hydraulic Requirements Weight
1000 RPM VX-100/200-RH 26 2000 30 GPM @ 2000 PSI 300 lbs.
VX-130/160 RH 33 1500 30 GPM @ 2000 PSI 300 lbs.
VX-160/130 RH 40 1000 30 GPM @ 2000 PSI 300 lbs.

VX-Series Industrial High-Pressure Hydraulic Drive Plunger Pumps

Hydraulic-Drive Plunger Pumps with Mounting Rails & High Pressure Hydraulic Motor

Heavy Duty, Cast Iron, high pressure Hydraulic Gear Motor with 1-1/4" female o-ring side ports,

#4 O.R.B. case drain, dual lift rings & a quad flex coupler drive assembly.  Pressurized or Flooded Suction ONLY.


Hydraulic Drive Model Gpm Psi Hydraulic Requirements Weight
1000 RPM VX-100/200 RH-HP 26 3000 28 GPM @ 3200 PSI 300 lbs.
1000 RPM VX-130/160 RH-HP 33 2500 28 GPM @ 3200 PSI 300 lbs.
1000 RPM VX-160/130 RH-HP 40 2000 28 GPM @ 3200 PSI 300 lbs.

back to top of page back to top of page

Pricing and specifications subject to change without notice.